环糊精对阿斯巴甜的甜感增强作用及二者相互作用热力学

目前环糊精（CD）对阿斯巴甜（ASP）甜感强度的影响研究主要集中在环糊精对阿斯巴甜的稳定性研究。我们认为CD对ASP甜感强度的提升与其和ASP的结合常数有一定的关系。本文选择了五种环糊精,α-环糊精（α-CD）、β-环糊精（β-CD）、γ-环糊精（γ-CD）、羟丙基-β-环糊精（HP-β-CD）、甲基-β-环糊精（Met-β-CD）,研究了这些环糊精存在下ASP的感官甜度的变化及二者的相互作用。结果表明,β-CD可以明显提升ASP的甜感强度。等温滴定量热（ITC）和荧光光谱对ASP与CDs结合过程亲和力的研究表明,ASP与β-CD的结合是自发的,并且具有最大的结合常数。差示扫描量热（DSC）、核磁共振（¹H NMR）以及傅里叶变换红外（FT-IR）揭示了其结合过程的机制。本研究对理解甜味剂甜感强度与热力学结合常数的关系具有重要的意义,也为基于结合常数筛选风味保持剂的方法提供有益的基础。     

丁酸甲酯单分子解离的非谐振效应

使用MP2/6-311++G（2d,2p）方法和基组,计算了丁酸甲酯单分子解离反应体系详细的势能面。应用RRKM理论,计算了在1000-5000 K的温度范围内的正则系综的速率常数。与此同时,在微正则系综下,我们计算了温度为1000-5000 K对应的能量从451.92到1519.52 kJ·mol^-1的速率常数。计算结果表明反应通道2、4和5的非谐振效应比较明显。因此对于丁酸甲酯单分子解离反应体系来说其非谐振效应是不能忽视的。     

高效液相色谱法研究白藜芦醇光致异构化动力学与平衡常数

反式白藜芦醇有多种生理活性,自然资源丰富,但存在光不稳定现象。以光致异构平衡对照品溶液,采用高效液相色谱建立了同时测定顺、反异构体浓度的方法。方法学考察显示符合含量测定要求,反式异构体在1.5~60 μ mol/L、顺式异构体在1.5~55 μ mol/L范围内线性关系良好,R²均达0.999。将该方法应用于研究光致异构化动力学及平衡常数,结果显示反式白藜芦醇在室温避光条件下中性、偏酸性及乙醇介质中稳定;25 ℃时在50%（v/v）乙醇介质中的光异构平衡常数为11.7±0.3。以光致异构平衡液制作标准曲线的策略简单方便,具有可操作性;反式白藜芦醇的稳定性与介质有关,在pH < 7的溶液中光致异构化为一级反应。     

单分子膜法测阿伏伽德罗常数实验中扩散剂的新探索

在单分子膜法测阿伏伽德罗常数实验中,为了克服扩散剂苯毒性大且实验误差大等缺点,通过查阅文献资料,发现环己烷、正己烷的物理性质符合在实验中作扩散剂的要求,并且毒性较苯低,所以选用环己烷、正己烷与苯做对比实验。实验结果表明,用环己烷作扩散剂测得的NA最接近理论值。故在用单分子膜法测阿伏伽德罗常数的实验中,环己烷可以代替苯作扩散剂。既能减小实验误差,又可以降低实验过程中有毒药品对实验者的危害。     

Field-induced phase transitions in chiral smectic liquid crystals studied by the constant current method

In ferroelectric liquid crystals, phase transitions can be induced by an electric field. The current constant method allows these transition to be quickly localized and thus the(E, T) phase diagram of the studied product can be obtained.In this work, we make a slight modification to the measurement principles based on this method. This modification allows the characteristic parameters of ferroelectric liquid crystal to be quantitatively measured. The use of a current square signal highlights a phenomenon of ferroelectric hysteresis with remnant polarization at null field, which points out an effect of memory in this compound.     

Improvement of sintering,nonlinear electrical,and dielectric properties of ZnO-based varistors doped with TiO_2

The effects of TiO_2 on sintering and nonlinear electrical properties of(98.5-x)ZnO–0.5MnO_2–0.5Co_2O_3-0.5Bi_2O_(3–x)TiO_2(x = 0.3,0.5,0.7,0.9 mol%) ceramic varistors prepared by the ceramic technique are investigated in this work.The optimum sintering temperature of the prepared samples is deduced by determining the firing shrinkage and water absorption percentages.The optimum sintering temperature is found to be 1200℃,at which each of the samples shows a maximum firing shrinkage and minimum water absorption.Also minimum water absorption appears in a sample of x = 0.9 mol%.Higher sintering temperature and longer sintering time give rise to a reduction in bulk density due to the increased amount of porosity between the large grains of ZnO resulting from the rapid grain growth induced by the liquid phase sintering.The crystal size of ZnO decreases with increasing TiO_2 doping.The addition of TiO_2 improves the nonlinear coefficient and attains its maximum value at x = 0.7 mol% of TiO_2,further addition negatively affects it.A decrease in capacitance consequently in the dielectric constant is recorded with increasing the frequency in a range of 30 kHz–200 kHz.The temperature and composition dependences of the dielectric constant and AC conductivity are also studied.The increase of temperature raises the dielectric constant because it increases ionic response to the field at any particular frequency.     

期货市场中持仓量及参与者对资产价格的影响研究

本文通过建立一个期货市场的均衡模型,提出在具有套保需求和有限风险承受能力的前提下,期货价格能够预测未来资产价格变动的方向,持仓量能够辅助预测未来资产价格变动的剧烈程度;此外,市场中不知情投机者具有风险调整市场收益的作用,不知情套保者的参与能够稳定市场。对于持仓量是否能够辅助预测未来资产价格变动的剧烈程度,本文利用中国商品期货市场数据进行了实证检验,结果表明与理论研究的结论一致。     

Investigations of thickness-shear mode elastic constant and damping of shunted piezoelectric materials with a coupling resonator

Shear-mode piezoelectric materials have been widely used to shunt the damping of vibrations where utilizing surface or interface shear stresses. The thick-shear mode(TSM) elastic constant and the mechanical loss factor can change correspondingly when piezoelectric materials are shunted to different electrical circuits. This phenomenon makes it possible to control the performance of a shear-mode piezoelectric damping system through designing the shunt circuit. However, due to the difficulties in directly measuring the TSM elastic constant and the mechanical loss factor of piezoelectric materials, the relationships between those parameters and the shunt circuits have rarely been investigated. In this paper, a coupling TSM electro–mechanical resonant system is proposed to indirectly measure the variations of the TSM elastic constant and the mechanical loss factor of piezoelectric materials. The main idea is to transform the variations of the TSM elastic constant and the mechanical loss factor into the changes of the easily observed resonant frequency and electrical quality factor of the coupling electro–mechanical resonator. Based on this model, the formular relationships are set up theoretically with Mason equivalent circuit method and they are validated with finite element(FE) analyses. Finally, a prototype of the coupling electro–mechanical resonator is fabricated with two shear-mode PZT5 A plates to investigate the TSM elastic constants and the mechanical loss factors of different circuit-shunted cases of the piezoelectric plate. Both the resonant frequency shifts and the bandwidth changes observed in experiments are in good consistence with the theoretical and FE analyses under the same shunt conditions. The proposed coupling resonator and the obtained relationships are validated with but not limited to PZT5 A.     

Positron Characteristics in Cadmium and Zinc Chalcogenides

Electron energy levels and positron states have been calculated for cadmium and zinc chalcogenide compounds within the pseudo-potential approach and the independent particle model.Furthermore,the present contribution deals with the electron and positron chemical potentials allowing the calculation of the positron affinity to different materials of interest and hetero-structures formed by these materials.Besides,we here determine the positron diffusion constant by means of the positron deformation potential.An attempt has been made to scale positron affinity and diffusion constant with the lattice constant and the band gap energy,respectively.Such scaling is found to be not possible.The information gathered by the present study is of prime importance for a better understanding of positron trapping at interfaces and precipitates and should be useful in slow positron beam experiments.     

Mobility of large clusters on a semiconductor surface:Kinetic Monte Carlo simulation results

The mobility of clusters on a semiconductor surface for various values of cluster size is studied as a function of temperature by kinetic Monte Carlo method. The cluster resides on the surface of a square grid. Kinetic processes such as the diffusion of single particles on the surface, their attachment and detachment to/from clusters, diffusion of particles along cluster edges are considered. The clusters considered in this study consist of 150–6000 atoms per cluster on average.A statistical probability of motion to each direction is assigned to each particle where a particle with four nearest neighbors is assumed to be immobile. The mobility of a cluster is found from the root mean square displacement of the center of mass of the cluster as a function of time. It is found that the diffusion coefficient of clusters goes as D = A(T)Nαwhere N is the average number of particles in the cluster, A(T) is a temperature-dependent constant and α is a parameter with a value of about-0.64 α -0.75. The value of α is found to be independent of cluster sizes and temperature values(170–220 K)considered in this study. As the diffusion along the perimeter of the cluster becomes prohibitive, the exponent approaches a value of-0.5. The diffusion coefficient is found to change by one order of magnitude as a function of cluster size.